Hi,
I get error messages about template and reading when I try encoding .AVI to .MPG. I've tried many files, same thing. Last week I had no problem. I've dowloaded a fresh version of TMPGEnc, same thing. What's going on ? Anybody has a good idea for me ? Thanks.

I want to cut a mpeg file into small (very small) chunks i.e when the scene changes. I thought that one way might be to cut at each I frame or evrery 10 I frames. How can i achieve this using TMPGEnc ? Any command line ? There will very many chinks 1000+

Thanks
JustVideo

The Slider in the "Merge & Cut" naturally stops on I Frames, so if you Use the Slider to Navigate were you want to cut then the cuts will allways be on an I frame..

hey,
im tring to megge some files together with the cut and merge and im getting a beeping noise.
the files were recorded with a realmagic dvd mpeg capture card,then encoded in ntsc video cd under tmpeg them merged with the setting of mpeg-1 video cd under the merge,and correct is hit before i run it.

if anyone knows how to fix this email me at seraphielx@hotmail.com and use subject tmpeg.

thanks
seraphiel helruner

This Happens when you Try to merge 2 or more files were the join Point is not on an I Frame...So When Joining 2 Files try cutting a Few Frames off of the end of File One and a Few Frames off the Beginning of File 2 then Merge them and Make sure you Click the "Correct" Button, This Button is supposed to fix this Problem but it doesn"t allways work....Cheers

Need help! when i try to make a vcd from an avi file this error pops out:
At adress 00000000000000, Read error occured against .....

Well that is Not enough information to go on...The More information you give us the better the answers we can give you...Like What Type of AVI File is it, Like what Codec was it compressed With, what are the Specs of the File Like Resolution and Frame Rate,and the Files Audio format, Tell us any Settings you used, and exactly were you get the error in the encodeing Proscess, and the Exact error message.......so Post back with some Info and we will try to help...

I'm tryng TMPGenc Plus and TMPGenc DVD Author.

I've tried to make a dvd video file from a AVi, choosing in the wizard "dvd pal" but the program made a file "m2v" that MPEG tools don't merge with another file "m2v".

In wich way can I merge multiple videos MPEG2 (dvd pal) in one long video MPEG2 (DVD pal)?
This because I want to make some long videos with several chapters. Infact it is necessary for author the DVD (your menues is up to 24 tracks, and I have 35 tracks splitted in 8 "families". I want to make 8 long videos splitted in 3/5 chapters each)

Can you help me?

Thank you very much for your help.

GiEfrom Italy

The Only reason why the "Merge & Cut" would not Merge 2 M2V files is because the 2 Files aren"t exactly the Same, All of the Files Merged have to have the Same Resolution and Aspect ratio and Frame Rate...but even with some Files that are Exactly the Same,Tmpgenc"s Mpeg tools still sometimes will have problems with Joining files...So you should check that all of the Files you are Joining are exactly the same, but if they are the same but they still will not join then you should use a Real Mpeg editor to Join the Files Like "Womble Mpeg2VCR" as it is One of the Best editing Programs for working with Mpeg files...You will also have to Find a way to Join the Wav Audio files together cuz you can not Join them In a Mpeg editor but any good audio editor will do...I don"t have a Link to Mpeg2VCR off hand but if you can"t find it you can email me and I"ll track down a Link were you can get it hopefully for free...Cheers

Thank you, Minion

The video are in the same resolution, size, etc.
However, i'll search for Womble Mpeg2VCR.

Ciao.

GiE>

I have a series of sequential still images that I have been trying to encode to MPEG1 using TMPGEnc. If I use the File>Preview option to playback my stills, the preview is very good but when encoded, there is a real reduction in quality (flickering, graininess, etc.). My input images are JPG files at 720x480 resolution. The MPEG output paramaters are MPEG1, 720X480, CBR, tested with various bitrates. Even with a very high bitrate (5000 or more), the quality of output improves but still not the kind of quality I would expect (again, the preview looks fantastic) and my filesize gets increasing larger as I increase the bitrate.

Can someone please help me? I'm not sure what else I can try.

Thanks.

Well have you Tried encodeing to Mpeg2 cuz Mpeg1 isn"t really meant for High Resolution Files, Mpeg2 works Much Better at High Resolutions...and Make sure you are encodeing the Files as Non-Interlace, and set the "Motion Search Precition" to "High Quality", You might also try useing a VBR Encodeing Mode Like "Constant Quality(CQ)" and at These High Resolution you have to Use High Bitrates even Higher than 5000KBS....Well this is all I can think of off the top of my head....Good Luck

I can't encode the video source of my movie. The audio source works but the video says "cannot open orunsupported file". I've tried everything but it won't work. Can someone please help me.

What is the Everything that you tried??? Have you tried going to "Options" to "Enviromental settings" to "Vfapi Plugins" and Raise the Priority of the "Direct Show File Reader" to "2"????

Yea I did put the direct show file reader to 2 but the same message appears.

What type of file is it??? I need to know the Format, Resolution, frame rate ,and the Codec it was compressed with for Video and Audio.....

Hi. Yea, I am having the same problem. Here is the strange thing. I have Windows 2000 installed on my laptop, and on a desktop system. Both systems have 128 meg of ram. Both systems have duplicate copies of TMPGEnc installed, and duplicate settings within TMPGEnc. The opperating systems have duplicate settings.

On the laptop the file is accepted by TMPGEnc and the MPEG files produced. On the desktop machine, using the same AVI file that TMPGEnc accepted on the laptop, it will not accept the AVI file for the video setting and says it is unsupported.

Kind of frustrating. The settings I am using are simply typical for a video CD.

I haven't been able to find an answer yet either. Kind of gave up and am just using the laptop.

I have a series of sequential still images that I have been trying to encode to MPEG1 using TMPGEnc. If I use the File>Preview option to playback my stills, the preview is very good but when encoded, there is a real reduction in quality (flickering, graininess, etc.). My input images are JPG files at 720x480 resolution. The MPEG output paramaters are MPEG1, 720X480, CBR, tested with various bitrates. Even with a very high bitrate (5000 or more), the quality of output improves but still not the kind of quality I would expect (again, the preview looks fantastic) and my filesize gets increasing larger as I increase the bitrate.

Can someone please help me? I'm not sure what else I can try.

Thanks.

If you are encoding at 720 x 480 at that high a bitrate I would use MPEG-2 instead of MPEG-1. You will get better results and it will be more compatible. For instance you, could then burn it to DVD. You might want to try "Constant Quality" instead of CBR.

Video Guy

oops .... I seem to have given you the same info Minion did above. I did not see your other post.

Next time do not double post.

Video Guy

When I tried to merge MPEG files with "MPEG tool", an error occurred that it is not compatible. Some of the files that came off my vcd won't read for some reason. How do I correct the compatibility problem? I don't understand how some can be compatible and some cannot if they came from the same vcd. Any help would greatly be appreciated. Thanks.

So are these Files Ripped off of a VCD?? If so Then I have had the Same Problem with SVCD"s that I ripped off of Disk then tried to Join together in the "Merge & Cut" ...I Think this is because Mpeg Files ripped off of CD-R"s can sometimes have a Lot of errors in them and I guess Tmpgenc doesn"t like these Errors, I have sometimes been able to Fix the files by First De-Multiplexing the Files then Multiplexing them back together and then Try to Join them But even this did not work all of the Time...I found it best to Just get my self a Real Mpeg editor like Mpeg2VCR and use it to Join my Files cuz it doesn"t have Problems with some files the wat Tmpgenc does...good Luck

I'd like to have a 2 pass encoding in 2 distincs steps (like in the divx 5 codec).
I'd like this so I could make the first pass during one night and the 2nd pass next night ;)

Here is a work around:

Start encoding the first night then in the morning when you want to use your computer click the encoding stop button, this will pause it. (Don't confirm the stop when the message box comes up, just leave it alone). Then the next night, resume the encoding.

Video Guy

It's a good idea, but if the computer crash or an installed program needs reboot all the first pass is lost :(

Just want to say thanks to the team who wrote the new version. I have been pulling my hair out for 2 weeks due to an older version of tmpgenc crashing no matter what I did. The new one works a treat so thanks again great work

When I do the output, it gives me the message that the files is too big to fit in a DVD so I click ignore. At exactly 66% (and it happened on 3 tries), it give me an error message box saying : cannot create more files, because this will make the volume of the DVD too big.

Is there a solution to let it create the DVD output files even though it will not fit on a DVD and I will just use one of this DVD compression software like DVDShrink or DVD2one so that it will fit in one DVD?